How to clean a lab-grown diamond?

To maintain the lab-grown diamond shine it needs to be cleaned. lab-grown diamonds, which are also called lab-created diamonds, are stunning stones that were created in a laboratory. They behave a lot like natural diamonds and they can get dirty, too. There’s nothing like a quick shine to your sparklers to really make them dazzle. Grime, dust and oils from your skin can cause the sparkle of these gemstones to dim. But don’t worry! They’re simple to clean and can typically be cared for at home. Crysdiam appreciates your high value gems and wants to assist you in keeping them brilliantly clean. Here’s what you need to know so you can safely clean your lab-grown diamonds, and the best methods and solutions for doing so. 

How to Clean Man Made Diamonds, What’s the Best Method? 

There are several methods you can use to clean your lab-grown diamond. One easy method involves warm soapy water. Simply add a small amount of mild dish soap to a bowl of warm water. Check the water temperature isn’t too high as stones or settings can be damaged by extreme heat. Let your diamond sit in the solution for 20 to 30 minutes. This is useful for smoothing any dirt or oil. Once you’ve finished soaking your diamond, grab an extra soft toothbrush or cloth and gently scrub the diamond. Focus on the setting, and be sure to pay special care to areas around it. Run your diamond under the warm water, making sure that it falls directly into a bowl, lest you lose your sparkling gemstone! Dry it with a soft, lint-free cloth each time. 

You can also use a jewelry cleaner. You can purchase these specialized diamond solutions. Refer to the directions included with the cleaner. Typically, you will allow the diamond to soak in the solution for a few minutes. Drain and rinse it well, then dry it as before. If you’re working with a diamond set in a ring or piece of jewelry that contains softer stones nearby, be sure to go slowly and cautiously, as some cleaners may damage them. 

Ultrasonic cleaners are also widely used. These are fancy machines that use sound waves to generate bubbles in a cleaning solution. When they pop, they very lightly clean the diamond without scouring. If you have a lab-grown diamond with loose stones or one set in a way that could get damaged, best not to use an ultrasonic cleaner. Just don’t forget to wash your lab-grown diamond on a regular basis. In this manner it's guaranteed to look its best! 

Where to Purchase the Most Effective lab-grown diamond Cleaning Products

Cleaning your lab-grown diamond is easy to do as long as you use the right cleaning solution. There should be some good jewelry cleaning solutions at jewelry stores ordinarily. You could also visit a store that sells diamonds and other jewelry, and inquire with their staff. They know which products will work best without damaging your precious gems. They can guide you to a mild cleaner that is safe for lab-grown diamonds. 

You can also get your hands on cleaning solutions online. Perhaps jewelry cleaning is marketed by many websites. You can read through reviews from other customers to find out what worked best for them. Which can help you determine what products are worth trying. Remember to buy product from trustworthy sellers. You are trying to make sure that your lab-grown diamonds are safe. 

Crysdiam also produces line of products for lab-grown diamonds safety. You can see what we have here. We want to keep your diamonds shining, and that's why our solutions are kind yet powerful. Cleaning your fine stones at home doesn’t have to be hard if you know what you’re doing and use the right tools. The key to maintaining your lab-grown diamonds is to keep them clean, and they will shine on! 

What are The Common Errors to Avoid In Cleaning lab-grown diamonds? 

Cleaning a lab-grown diamond is not as complicated as it may sound, but there are some no-nos that people tend to make. One common error is using toxic chemicals. A strong cleanser will make my diamonds sparkle even more. But in fact, those chemicals can damage the diamond. They can leave scratches or even mar the metal around the diamond. Your best bet, playing it safe with gentle soapy water. Dish soap in warm water is the best for diamond cleaning. Other mistakes include the use of a rough cloth. Also, when you clean it, use a soft cloth microfiber works. Coarse fabrics will scratch the noodle surface. Also, do not use paper towels, as they can cause microscopic scratches that will dull the sparkle. 

Another frequent mishap is a failure to check the settings. Before you clean, it’s a good idea to give the diamond a close look. Double-check that the environment still locked. Well, if it’s loose and you’re cleaning the diamond on a piece of jewelry, then it might fall out. That could result in losing your gem! Always be sure and, if necessary, bring it a jeweler to have it tightened before you begin to clean. 

Some folks also believe that cleaning a diamond with an ultrasonic cleaner is going to cut it. For some jewelry these machines were perfect but too powerful for another lab-grown diamond. It is safer to wipe them down by hand. And lastly, don’t forget to rinse your diamond after cleaning. The diamond may appear cloudy if soap is left behind. Just hold it under warm running water for a moment and then pat it dry. Now that you know what not to do, you can continue enjoying your lab-grown diamond worry-free! 

Where to Purchase a Wholesale Cleaning Kit for lab-grown diamonds

When cleaning your lab-grown diamond, the tools are very important. One way to acquire these tools is through wholesale cleaning kits. These kits generally contain all you’ll need to keep your diamonds sparkling. You can get these kits at a few different locations. Many jewelry stores sell cleaning kits, and some will even provide wholesale prices. But it can be easy to find cleaning kits online. Websites that specialize in jewelry or beauty products may offer special on cleaning kits, as well. Many of these online merchants sell in bulk, which can be cost-efficient if you are buying more than one kit. 

Make sure to check what’s inside when you’re searching for a wholesale cleaning kit. Go for a kit that includes a soft brush, a microfiber cloth and gentle cleaning solution. Some kits also include special tools to reach into the small areas in your jewelry. That's not a bad thing, since dirt can accumulate in nooks and crannies. You could also check out websites that are used by businesses that buy and sell to one another, such as B2B websites; You might find a really good deal on these cleaning kits. 

They also have a very nice lab-grown diamond cleaning kit! If you want something dependable, go to their site and see what they have in stock. Plus, when you purchase from Crysdiam, you can be confident that the products are safe and work to clean your diamonds. Purchasing wholesale not only means good savings, but also having all the necessary elements available for maintenance of your diamond jewelry regularly. 

How Do You Indicate When Your Man Made Diamond Needs to Be Cleaned?  

The timing of when you clean your lab-grown diamond is as important as the cleaning process. Some of the time, it can be pretty obvious when your diamond needs a wash. That’s one of the first ways to tell, if there is a dull or cloudy spot on the surface of the diamond. If a diamond is clean, it will show off plenty of sparkle and shine. But if dirt, the oils on your skin or dust cover it, Turns out, even that glow fades. If that shine is lost, then it’s time to which means wipe out the cleaning supplies! 

Another indication is if your dealing feels greasy or slippery. This often occurs when you use the diamond each day. The oils in your fingers can accumulate on the diamond, causing it to feel dirty. If you do notice this sensation, it is time to clean your diamond. One thing you can do, and it is a good habit to get into, is to inspect your jewelry regularly. And you should examine your diamond material up close every few weeks. 

Also, observe the way your diamond catches light. If it’s not shining like it once did, you may want to clean it sooner rather than later. Another hint might be that your diamond simply needs some TLC if you notice the metal around the diamond is darkening, or becoming tarnished. That part isn’t the diamond, but it can influence how the overall piece appears. Dirty metal can also detract from a diamond’s beauty. 

Finally, if you are dressing for a special event, it’s good practice to remove the dirt up before adorning your diamond. When it’s a wedding, birthday or any special event. A clean diamond can go along way. It is important to keep your simulated diamond clean in order for it to be beautiful and the following information gives you a quick reference for optimal care. By monitoring these warning signs you will be able to keep that diamond sparkling like new and as brilliant as the day you pulled it out of your Crysdiam box!